Results 1 to 8 of 8
  1. #1
    Senior Member
    Join Date
    Nov 2009
    Location
    south jersey
    Posts
    3,177

    B18 transmission bolts?

    I'm trying to put my transmission back on my LS. Well swapping it from an old b18a1 to a b18b1...i got the tranny on the new motor but I see the tranny bolts are different sizes...I'm confused as to where the long bolts go and where the short bolts go on the tranny housing to connect it back to the motor.


  2. #2
    Senior Member
    Join Date
    Jan 2010
    Location
    JERSEY
    Posts
    2,375
    bump...........somebody give my boy some help i would but i dont know the answer...lol
    [SIZE="2"]YOUR CAR SUCKS :321:[/SIZE]

  3. #3
    Senior Member
    Join Date
    Oct 2005
    Location
    V8 TERRITORY
    Posts
    78,649
    the bolts are the same, you just have to swap the around

    my wheels keep spinnin and the hoes keep grinnin!

  4. #4
    Ok LeTs tRy tHiS AgAin... sajoma856's Avatar
    Join Date
    Mar 2006
    Location
    (856) s.jersey
    Posts
    9,051
    it should have around
    7-17mm bolts that go around the tranny
    2-19mm for the rear braket
    2 12mm for the slave cylinder
    and a few 10mm for the dust shield


    i hope you talking about those....


  5. #5
    Senior Member
    Join Date
    Oct 2005
    Location
    V8 TERRITORY
    Posts
    78,649
    just start puttin them in,and if the bolt bottoms out before it gets tight then you know that a short bolt goes there......thats about as easy as i can tell you.

    my wheels keep spinnin and the hoes keep grinnin!

  6. #6
    Senior Member
    Join Date
    Oct 2005
    Location
    V8 TERRITORY
    Posts
    78,649
    Quote Originally Posted by sajoma856 View Post
    it should have around
    7-17mm bolts that go around the tranny
    2-19mm for the rear braket
    2 12mm for the slave cylinder
    and a few 10mm for the dust shield


    i hope you talking about those....
    thanks..... good info

    my wheels keep spinnin and the hoes keep grinnin!

  7. #7
    Senior Member
    Join Date
    Nov 2009
    Location
    south jersey
    Posts
    3,177
    no, the 6 main bolts that hold the tranny casing onto the motor

  8. #8
    Senior Member
    Join Date
    Nov 2009
    Location
    south jersey
    Posts
    3,177
    ttttttttttttttttttttttttttttttt

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •