![]() |
![]() www.racewaypark.com |
|
|||||||
B20vtec.com
|
||
|
||
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
B20vtec.com Vendor
|
Xenon digital slim hid conversion kit $75 only! Free shipping!! Limited time offer
![]() 135 11TH STREET BROOKLYN NY 11215 TEL: 718.837.0766 -ASK FOR JOHNNY ONLY FOR $75!! FREE SHIPPING IF NECESSARY! DISCOUNT ONLY FOR B20 MEMBERS ONLY!!! DIGITAL XENON HID KIT BRAND NEW SLIM DIGITAL XENON HID CONVERSION KIT [COLOR="SlateGray"][SIZE="4"]12 Month Warranty on Both Bulbs & Ballast !! Own Factory, Lowest Price + Shipping Guaranteed! Available Bulb Types: 880/881/893/894, H1, H3, H4(9003)/Low, H7, H8, H9, H10, H13(9008)/Low, H11, 9004/Low, 9005(HB3), 9006(HB4) and 9007(HB5)/Low, H10(9145) Available Colors Temperature: 3000K, 6000K, 8000K, 10000K, 12000K, 20000K, AND 30000K The ballast is digital slim version which is more stable than analog fat ballast. The size of ballast is about 3"x2" and thickness is 0.5". HERE ARE SOME OF OUR CUSTOMERS WITH OUR HID KITS! ![]() ![]() ![]() ![]() ![]() INSTALLATION INSTRUCTIONS ARE INCLUDED, EASY TO FOLLOW: 1) Make sure to disconnect your battery. 2) Remove your original halogen light bulbs and gently put them aside. 3) Put in the HID Xenon Conversion Bulb(s) in to the housings where the original bulb(s) was. - Make sure not to touch the HID bulb with your fingers, or hit it against anything. - If bulbs are stained, use alcohol pad to remove stains (no liquids). - For cars with dust caps, make sure to modify the cap for the lights or use something equivalent to protect the bulbs. 4) Connect wiring in to their proper connections. 5) Connect the wiring to the HID bulbs. 6) Find a mounting point for the ballasts; use the double sided tape if needed. - Do not put ballasts near any hoses or other car parts, to prevent damage. - Do not drill holes in to the ballasts or do other modification to them. 7) Make sure to secure all wiring with the zip ties. - Do not place wiring near car parts which can damage them. 8) Reconnect your battery and check wiring 9) Start your car and turn the lights on, please allow your lights to stay on for 5-15 minutes. There is a 50 hour "break in" period for the lights. NOTE: All of our kits will light up the color promised after 50 hours of usage, since all the gases within the bulb need to mix properly. Please Note: Some cars require more work than others to install the lights. The 50 Hours break in period allows your light to reach its maximum shine. Read your cars manual and HID Xenon Conversion Kits manual for more information regarding installation. Also, it is recommended to upgrade your fuses to 20AMP after installation. In some vehicles it is necessary to connect the connectors opposite of positive to negative and negative to positive. ONLY FOR $75!! FREE SHIPPING IF NECESSARY! DISCOUNT ONLY FOR B20 MEMBERS ONLY!!! Last edited by aeros; 11-12-2009 at 07:40 PM. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|