how 2 wire vtec ( obd1 )

[sicsoul]

i know i have to run 3 wires

first 1 VTEC SOLENOID ( THE 1 WIRE )
then i see the green plug ( pressure switch )

what 2 wires do i run to this from the ecu? ( names? )

yes i seen the sticky <ECU Pinouts> but i still dont see what 2 wires would run into iT

[sicsoul]

rep points to who ever helps me ouT///

[lsveg6]

is it for obd0?

If so...
A8- Vtec Solenoid (Green/Yellow Wire)
B5- Goes to pressure switch (blue/black wire)
The black wore coming off the pressure switch is a ground. You can ground it to any ground ( a lot of people ground it to 1 of the bolts that holds the solenoid to the head.

If OBD1...
A4- Vtec Solenoid.
D6- Goes to pressure switch (blue/black wire) (Other wire ground like i said above)

If OBD2A...
A8- Vtec Solenoid
C15- Goes to pressure switch (blue/black wire)

If OBD2B...
B12- Vtec Solenoid
C10- Goes to pressure switch (blue/black wire)

[sicsoul]

Originally Posted by lsveg6

is it for obd0?

for the car im gonna do its obd1
the nex car is a obdo

soo if u can help me out with the 2..?

[sicsoul]

Originally Posted by lsveg6

is it for obd0?

If so...
A8- Goes to solenoid.
B5- Goes to pressure switch (blue wire)
The black wore coming off the pressure switch is a ground. You can ground it to any ground ( a lot of people ground it to 1 of the bolts that holds the solenoid to the head.

If OBD1...
A4-Goes to solenoid.
D6-Goes to pressure switch (blue wire) (Other wire ground like i said above)

thanx aloT!!!

one more question
the ground does it matter wat side its on??

[lsveg6]

If you are looking at the plug from where the wires come out. And you have it so so where you would normally push to un clip it. The top wire would be the solenoid wire, and the bottom would be ground... Like look in this pic....

[sicsoul]

Originally Posted by lsveg6

If you are looking at the plug from where the wires come out. And you have it so so where you would normally push to un clip it. The top wire would be the solenoid wire, and the bottom would be ground... Like look in this pic....

is it ok if i add this 2 my faq's?

[lsveg6]

In your pic here. the top pin would be the pressure switch (blue/black wire), The bottom pin would need to be grounded somewhere.

[lsveg6]

Originally Posted by lilsicsoul

is it ok if i add this 2 my faq's?

what you mean? the pic/ i just went on a google to shopw you an example lol. I dunno who's pic it is.

[sicsoul]

Originally Posted by lsveg6

what you mean? the pic/ i just went on a google to shopw you an example lol. I dunno who's pic it is.

add this info to this.. official ef how to do links... H-T..