Need help w/cel!

coupatroopa · 10-30-2009, 02:25 AM

i have a 95 civic ex coupe with a mini me swap that is a d15b7 bottom end, and d16z6 top end. i am getting a cel. the code i am receiving is 22 (vtec pressure switch). i have swapped the vtec solenoid out 3 different times. and the only thing that i can think of is it is not getting enough oil to the head. but iirc the b7 and z6 have the same oil pumps. can someone help me trouble shoot this problem.

coupatroopa · 10-30-2009, 03:05 AM

bump!

coupatroopa · 10-30-2009, 08:31 PM

i need some help!

coupatroopa · 10-31-2009, 12:51 AM

i guess you people are too good to help someone out. unless you don't know anything about Honda's

***Mz K*** · 10-31-2009, 12:56 AM

hmmm... check your oil levels & re-check your wiring..

lanbeteta69 · 10-31-2009, 02:57 AM

did you remove the oil jets on cylinder 2 and 4

coupatroopa · 10-31-2009, 03:12 AM

Quote:

Originally Posted by Mz K

hmmm... check your oil levels & re-check your wiring..

oil level is good and this is a uncut harness.

Quote:

Originally Posted by lanbeteta69

did you remove the oil jets on cylinder 2 and 4

and yes i did. i am thinking that i have a bad oil pressure switch on the vtec solenoid. but i have drove he car for a year before i got this cel/

coupatroopa · 10-31-2009, 03:30 AM

and there is only one oil restrictor/oil jet on the d15b7 blocks

10-31-2009, 12:56 AM	#5 (permalink)
*Mz K* intellectually sarcastic. Join Date: Jun 2006 Location: 201/973 \| NJ Posts: 10,020 iTrader: (6)	hmmm... check your oil levels & re-check your wiring.. __________________ bbpin: 4037A145 ownage crew member #1 honda bitches crew member #4 no life crew member #13 official moat crew member #51 MBbaby on board crew member #50 i'm from new jersey crew member #106 selling new & used baby items $50 and under

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-31-2009, 02:57 AM	#6 (permalink)
lanbeteta69 Noob Join Date: May 2007 Posts: 435 iTrader: (1)	did you remove the oil jets on cylinder 2 and 4

B20vtec.com