I have 2 broken tranny screws in my block. Does anyone know how to take them out? - Page 2

C yaaaa · 11-02-2008, 05:05 PM

depending on how far the broken piece is inside the block if u can feel it get a 15mm bolt with a good head grind down the end to clean it up and tack weld it to the broken bolt make sure you do a good weld always do it right the 1st time once you have welded the bolt onto the broken one wait for it to cool down and loosen it up ive done it plenty of times it works great

fourthchirpin · 11-02-2008, 09:59 PM

see if u can hammer cuts in the bolt it self so u can start to screw it out with a phillup or a flat head. U can drill it out also. I think the reason this happened was because you was missing dowl pins that keep the tranny in place.

BlACkCTr96 · 11-02-2008, 11:14 PM

easy outs FTW sears and most stores got em

tekk220 · 11-25-2008, 10:37 PM

sux... i front the back tranny bolt with my old block... it sucked balls

11-02-2008, 09:59 PM	#12 (permalink)
fourthchirpin Senior Member Join Date: Dec 2004 Posts: 4,274 iTrader: (0)	see if u can hammer cuts in the bolt it self so u can start to screw it out with a phillup or a flat head. U can drill it out also. I think the reason this happened was because you was missing dowl pins that keep the tranny in place. __________________ "RACING IMPROVES THE BREED"

11-02-2008, 11:14 PM	#13 (permalink)
BlACkCTr96 Senior Member Join Date: Apr 2007 Location: Where fast cars are built!! Posts: 3,536 iTrader: (5)	easy outs FTW sears and most stores got em __________________ Team Jdm Junkyz

11-25-2008, 10:37 PM	#14 (permalink)
tekk220 Senior Member Join Date: Dec 2005 Posts: 2,067 iTrader: (4)	sux... i front the back tranny bolt with my old block... it sucked balls __________________ I<3 BMX CREW #26

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-02-2008, 05:05 PM	#11 (permalink)
C yaaaa Member Join Date: Feb 2006 Posts: 936 iTrader: (1)	depending on how far the broken piece is inside the block if u can feel it get a 15mm bolt with a good head grind down the end to clean it up and tack weld it to the broken bolt make sure you do a good weld always do it right the 1st time once you have welded the bolt onto the broken one wait for it to cool down and loosen it up ive done it plenty of times it works great