![]() |
![]() |
|
|
#1 (permalink) |
|
Senior Member
|
88 Honda CRX SI ....Tryna Wire Up My Bumper Lights To My Turn Signals .... I Wired Up The Colors But Wen i Turn On The Blinkers There Very Dimmer .... Dont Seem To B Blinking .... Need Help .... Ne Diagrams Out There
__________________
|
|
|
|
|
|
#6 (permalink) |
|
Noob
|
ok what do u want it to do, just blink or stay on with the parking lights then blink when u want to ?........the red wire is just power so if you connect that it wont blink, the green wire is only to make them blink and the black is ground so make sure the black wires are connected good
__________________
![]() DOMINICAN CREW MEMBER #94
|
|
|
|
|
|
#9 (permalink) |
|
Super Moderator
|
well the 1156 bulb the one originally for the bumper lights is single filament.
the 1157 is dual filament. also as far as wiring goes black will obviously be ground. you just need to test the other 2 wires to see which one is brighter... thats the one that you will tap into your original signal wire. the other wire you just tap it into your parking light wire.
__________________
TMC-TrunkMonkeyCrew |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|