lowering the front

allcoupedup · 10-19-2009, 10:21 PM

the front of my car is siting a little higher than the rear and i want to level it out i was going to cut some of the top of my spring but i dont kn ow if i have to pull the ball joint and upper control arm apart ?

im tryin to level my car out cause the front sits a good 1-2 in. higher than the rear. what is the easiest way to cut the springs? do i have to take the spring all the way off or is there an easier way. cause i dont have a puller for the ball joint.

***tilegend*** · 10-19-2009, 10:29 PM

leave it alone... walk away from the car.

jdmsib516 · 10-19-2009, 10:35 PM

That's the cheap way out cut springs.. But it fucks upp in the long run.. Just buy springs u can find them anywhere...

allcoupedup · 10-19-2009, 10:35 PM

should i just get new springs or what. cause it doesnt have real good suspension. its got tokiko blues and same springs

allcoupedup · 10-19-2009, 10:36 PM

thanks just gonna get springs then

jdmsib516 · 10-19-2009, 10:39 PM

Yuppp that's ur best bet, h&r tien, k-sport those are a few name brands that are good for suspension

SsydeKidd · 10-19-2009, 10:51 PM

Get some springs don't be cheap If u can't afford it then save em n get springs after... Don't get cheap springs either

10-19-2009, 10:21 PM	#1 (permalink)
allcoupedup Noob Join Date: Sep 2009 Location: wisconsin Posts: 83 iTrader: (0)	the front of my car is siting a little higher than the rear and i want to level it out i was going to cut some of the top of my spring but i dont kn ow if i have to pull the ball joint and upper control arm apart ? im tryin to level my car out cause the front sits a good 1-2 in. higher than the rear. what is the easiest way to cut the springs? do i have to take the spring all the way off or is there an easier way. cause i dont have a puller for the ball joint. Last edited by tilegend; 10-19-2009 at 10:29 PM.

10-19-2009, 10:29 PM	#2 (permalink)
*tilegend* Super Moderator Join Date: Dec 2007 Location: LI Posts: 3,819 iTrader: (5)	leave it alone... walk away from the car. __________________ TMC-TrunkMonkeyCrew

10-19-2009, 10:35 PM	#3 (permalink)
jdmsib516 Senior Member Join Date: Jan 2009 Posts: 7,704 iTrader: (0)	That's the cheap way out cut springs.. But it fucks upp in the long run.. Just buy springs u can find them anywhere... __________________ Team ef member #9 Pupusa racing crew #29 Fist pumping crew member #6

10-19-2009, 10:39 PM	#6 (permalink)
jdmsib516 Senior Member Join Date: Jan 2009 Posts: 7,704 iTrader: (0)	Yuppp that's ur best bet, h&r tien, k-sport those are a few name brands that are good for suspension __________________ Team ef member #9 Pupusa racing crew #29 Fist pumping crew member #6

10-19-2009, 10:51 PM	#7 (permalink)
SsydeKidd Senior Member Join Date: Oct 2008 Posts: 1,679 iTrader: (8)	Get some springs don't be cheap If u can't afford it then save em n get springs after... Don't get cheap springs either __________________ R.I.P FRANK S. ALES jR.O9.11.1972-11.26.2OO8

10-19-2009, 10:35 PM	#4 (permalink)
allcoupedup Noob Join Date: Sep 2009 Location: wisconsin Posts: 83 iTrader: (0)	should i just get new springs or what. cause it doesnt have real good suspension. its got tokiko blues and same springs

10-19-2009, 10:36 PM	#5 (permalink)
allcoupedup Noob Join Date: Sep 2009 Location: wisconsin Posts: 83 iTrader: (0)	thanks just gonna get springs then

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

B20vtec.com